- A hot backup is basically taking a backup of the database while it is still up and running and it must be in archive log mode. A cold backup is taking a backup of the database while it is shut down and does not require being in archive log mode. The benefit of taking a hot backup is that the database is still available for use while the backup is occurring and you can recover the database to any point in time. The benefit of taking a cold backup is that it is typically easier to administer the backup and recovery process. In addition, since you are taking cold backups the database does not require being in archive log mode and thus there will be a slight performance gain as the database is not cutting archive logs to disk.
- I would create a text based backup control file, stipulating where on disk all the data files where and then issue the recover command with the using backup control file clause.
- Issue the create spfile from pfile command.
- A data block is the smallest unit of logical storage for a database object. As objects grow they take chunks of additional storage that are composed of contiguous data blocks. These groupings of contiguous data blocks are called extents. All the extents that an object takes when grouped together are considered the segment of the database object.
- Use the describe command or use the dbms_metadata.get_ddl package.
- In the alert log.
- Both the truncate and delete command have the desired outcome of getting rid of all the rows in a table. The difference between the two is that the truncate command is a DDL operation and just moves the high water mark and produces few rollback data. The delete command, on the other hand, is a DML operation, which will produce rollback data and thus take longer to complete.
- Faster access to data blocks in a table.
- Fact tables and dimension tables. A fact table contains measurements while dimension tables will contain data that will help describe the fact tables.
- A Bitmap index.
- A Primary or Unique Key can be used to enforce uniqueness on one or more columns.
- A Referential Integrity Contraint can be used to enforce a Foreign Key relationship between two tables.
- A Not Null constraint - to ensure a value is entered in a column
- A Value Constraint - to check a column value against a specific set of values.
- Disable the foreign key constraint to the parent, drop the table, re-create the table, enable the foreign key constraint.
- ARCHIVELOG mode is a mode that you can put the database in for creating a backup of all transactions that have occurred in the database so that you can recover to any point in time. NOARCHIVELOG mode is basically the absence of ARCHIVELOG mode and has the disadvantage of not being able to recover to any point in time. NOARCHIVELOG mode does have the advantage of not having to write transactions to an archive log and thus increases the performance of the database slightly.
- Alter database backup control file to trace.
- STARTUP NOMOUNT - Instance startup
- STARTUP MOUNT - The database is mounted
- STARTUP OPEN - The database is opened
- The INST_ID column which indicates the instance in a RAC environment the information came from.
- Create a plan table with utlxplan.sql.
- Use the explain plan set statement_id = 'tst1' into plan_table for a SQL statement
- Look at the explain plan with utlxplp.sql or utlxpls.sql
- Use the buffer cache advisory over a given workload and then query the v$db_cache_advice table. If a change was necessary then I would use the alter system set db_cache_size command.
- You get this error when you get a snapshot too old within rollback. It can usually be solved by increasing the undo retention or increasing the size of rollbacks. You should also look at the logic involved in the application getting the error message.
- ORACLE_BASE is the root directory for oracle. ORACLE_HOME located beneath ORACLE_BASE is where the oracle products reside.
- SELECT dbtimezone FROM DUAL;
- It ensure the use of consistent naming conventions for databases and links in a networked environment.
- WRAP
- They are all named PL/SQL blocks.
- Function must return a value. Can be called inside a query.
- Procedure may or may not return value.
- Package is the collection of functions, procedures, variables which can be logically grouped together.
6. Name three advisory statistics you can collect.
7. Where in the Oracle directory tree structure are audit traces placed?
8. Explain materialized views and how they are used.
9. When a user process fails, what background process cleans up after it?
- PMON
- Job Queue Process (CJQ)
- v$session,v$session_wait
13. How would you force a log switch?
- alter system switch logfile;
15. What does coalescing a tablespace do?
- Coalesce simply takes contigous free extents and makes them into a single bigger free extent.
- TEMP tablespace gets cleared once the transaction is done where as PERMANENT tablespace retails the data.
- SYSTEM
- Grant create session to username;
- alter tablespace USERS add datafile '/ora01/oradata/users02.dbf' size 50M;
- alter database datafile '/ora01/oradata/users02.dbf' resize 100M;
- dba_data_files
- dba_free_space
- By implementing an INSERT trigger for logging details during each INSERT operation on the table
- ALTER INDEX index_name REBUILD;
- A table partition is also a table segment, and by using partitioning technique we can enhance performance of table access.
- show errors
- exec dbms_stats.gather_table_stats
- Also, remember to analyze all associated indexes on that table using dbms_stats.gather_index_stats
- alter session set sql_trace='TRUE';
- SQL*LOADER loads external data which is in OS files to oracle database tables while IMPORT utility imports data only which is exported by EXPORT utility of oracle database.
- TNSNAMES.ORA and SQLNET.ORA
2. What is a mutating table error and how can you get around it?This happens with triggers. It occurs because the trigger is trying to update a row it is currently using. The usual fix involves either use of views or temporary tables so the database is selecting from one while updating the other.
3. Describe the use of %ROWTYPE and %TYPE in PL/SQL Expected answer: %ROWTYPE allows you to associate a variable with an entire table row. The %TYPE associates a variable with a single column type.
4. What packages (if any) has Oracle provided for use by developers?Expected answer: Oracle provides the DBMS_ series of packages. There are many which developers should be aware of such as DBMS_SQL, DBMS_PIPE, DBMS_TRANSACTION, DBMS_LOCK, DBMS_ALERT, DBMS_OUTPUT, DBMS_JOB, DBMS_UTILITY, DBMS_DDL, UTL_FILE. If they can mention a few of these and describe how they used them, even better. If they include the SQL routines provided by Oracle, great, but not really what was asked.
5. Describe the use of PL/SQL tablesExpected answer: PL/SQL tables are scalar arrays that can be referenced by a binary integer. They can be used to hold values for use in later queries or calculations. In Oracle 8 they will be able to be of the %ROWTYPE designation, or RECORD.
6. When is a declare statement needed ?The DECLARE statement is used in PL/SQL anonymous blocks such as with stand alone, non-stored PL/SQL procedures. It must come first in a PL/SQL stand alone file if it is used.
7. In what order should a open/fetch/loop set of commands in a PL/SQL block be implemented if you use the %NOTFOUND cursor variable in the exit when statement? Why?Expected answer: OPEN then FETCH then LOOP followed by the exit when. If not specified in this order will result in the final return being done twice because of the way the %NOTFOUND is handled by PL/SQL.
8. What are SQLCODE and SQLERRM and why are they important for PL/SQL developers?Expected answer: SQLCODE returns the value of the error number for the last error encountered. The SQLERRM returns the actual error message for the last error encountered. They can be used in exception handling to report, or, store in an error log table, the error that occurred in the code. These are especially useful for the WHEN OTHERS exception.
9. How can you find within a PL/SQL block, if a cursor is open?Expected answer: Use the %ISOPEN cursor status variable.
10. How can you generate debugging output from PL/SQL?Expected answer: Use the DBMS_OUTPUT package. Another possible method is to just use the SHOW ERROR command, but this only shows errors. The DBMS_OUTPUT package can be used to show intermediate results from loops and the status of variables as the procedure is executed. The new package UTL_FILE can also be used.
11. What are the types of triggers?Expected Answer: There are 12 types of triggers in PL/SQL that consist of combinations of the BEFORE, AFTER, ROW, TABLE, INSERT, UPDATE, DELETE and ALL key words: BEFORE ALL ROW INSERT AFTER ALL ROW INSERT BEFORE INSERT AFTER INSERT etc.
1. A tablespace has a table with 30 extents in it. Is this bad? Why or why not.
Multiple extents in and of themselves aren?t bad. However if you also have chained rows this can hurt performance.
2. How do you set up tablespaces during an Oracle installation?
You should always attempt to use the Oracle Flexible Architecture standard or another partitioning scheme to ensure proper separation of SYSTEM, ROLLBACK, REDO LOG, DATA, TEMPORARY and INDEX segments.
3. You see multiple fragments in the SYSTEM tablespace, what should you check first?
Ensure that users don?t have the SYSTEM tablespace as their TEMPORARY or DEFAULT tablespace assignment by checking the DBA_USERS view.
4. What are some indications that you need to increase the SHARED_POOL_SIZE parameter?
Poor data dictionary or library cache hit ratios, getting error ORA-04031. Another indication is steadily decreasing performance with all other tuning parameters the same.
5. What is the general guideline for sizing db_block_size and db_multi_block_read for an application that does many full table scans?
Oracle almost always reads in 64k chunks. The two should have a product equal to 64 or a multiple of 64.
6. What is the fastest query method for a table
Fetch by rowid
7. Explain the use of TKPROF? What initialization parameter should be turned on to get full TKPROF output?
The tkprof tool is a tuning tool used to determine cpu and execution times for SQL statements. You use it by first setting timed_statistics to true in the initialization file and then turning on tracing for either the entire database via the sql_trace parameter or for the session using the ALTER SESSION command. Once the trace file is generated you run the tkprof tool against the trace file and then look at the output from the tkprof tool. This can also be used to generate explain plan output.
8. When looking at v$sysstat you see that sorts (disk) is high. Is this bad or good? If bad -How do you correct it?
If you get excessive disk sorts this is bad. This indicates you need to tune the sort area parameters in the initialization files. The major sort are parameter is the SORT_AREA_SIZe parameter.
9. When should you increase copy latches? What parameters control copy latches
When you get excessive contention for the copy latches as shown by the "redo copy" latch hit ratio. You can increase copy latches via the initialization parameter LOG_SIMULTANEOUS_COPIES to twice the number of CPUs on your system.
10. Where can you get a list of all initialization parameters for your instance? How about an indication if they are default settings or have been changed
You can look in the init.ora file for an indication of manually set parameters. For all parameters, their value and whether or not the current value is the default value, look in the v$parameter view.
11. Describe hit ratio as it pertains to the database buffers. What is the difference between instantaneous and cumulative hit ratio and which should be used for tuning
The hit ratio is a measure of how many times the database was able to read a value from the buffers verses how many times it had to re-read a data value from the disks. A value greater than 80-90% is good, less could indicate problems. If you simply take the ratio of existing parameters this will be a cumulative value since the database started. If you do a comparison between pairs of readings based on some arbitrary time span, this is the instantaneous ratio for that time span. Generally speaking an instantaneous reading gives more valuable data since it will tell you what your instance is doing for the time it was generated over.
12. Discuss row chaining, how does it happen? How can you reduce it? How do you correct it
Row chaining occurs when a VARCHAR2 value is updated and the length of the new value is longer than the old value and won?t fit in the remaining block space. This results in the row chaining to another block. It can be reduced by setting the storage parameters on the table to appropriate values. It can be corrected by export and import of the effected table.
1. Give one method for transferring a table from one schema to another:
There are several possible methods, export-import, CREATE TABLE... AS SELECT, or COPY.
2. What is the purpose of the IMPORT option IGNORE? What is it?s default setting
The IMPORT IGNORE option tells import to ignore "already exists" errors. If it is not specified the tables that already exist will be skipped. If it is specified, the error is ignored and the tables data will be inserted. The default value is N.
3. You have a rollback segment in a version 7.2 database that has expanded beyond optimal, how can it be restored to optimal
Use the ALTER TABLESPACE ..... SHRINK command.
4. If the DEFAULT and TEMPORARY tablespace clauses are left out of a CREATE USER command what happens? Is this bad or good? Why
The user is assigned the SYSTEM tablespace as a default and temporary tablespace. This is bad because it causes user objects and temporary segments to be placed into the SYSTEM tablespace resulting in fragmentation and improper table placement (only data dictionary objects and the system rollback segment should be in SYSTEM).
5. What are some of the Oracle provided packages that DBAs should be aware of
Oracle provides a number of packages in the form of the DBMS_ packages owned by the SYS user. The packages used by DBAs may include: DBMS_SHARED_POOL, DBMS_UTILITY, DBMS_SQL, DBMS_DDL, DBMS_SESSION, DBMS_OUTPUT and DBMS_SNAPSHOT. They may also try to answer with the UTL*.SQL or CAT*.SQL series of SQL procedures. These can be viewed as extra credit but aren?t part of the answer.
6. What happens if the constraint name is left out of a constraint clause
The Oracle system will use the default name of SYS_Cxxxx where xxxx is a system generated number. This is bad since it makes tracking which table the constraint belongs to or what the constraint does harder.
7. What happens if a tablespace clause is left off of a primary key constraint clause
This results in the index that is automatically generated being placed in then users default tablespace. Since this will usually be the same tablespace as the table is being created in, this can cause serious performance problems.
8. What is the proper method for disabling and re-enabling a primary key constraint
You use the ALTER TABLE command for both. However, for the enable clause you must specify the USING INDEX and TABLESPACE clause for primary keys.
9. What happens if a primary key constraint is disabled and then enabled without fully specifying the index clause
The index is created in the user?s default tablespace and all sizing information is lost. Oracle doesn?t store this information as a part of the constraint definition, but only as part of the index definition, when the constraint was disabled the index was dropped and the information is gone.
10. (On UNIX) When should more than one DB writer process be used? How many should be used
If the UNIX system being used is capable of asynchronous IO then only one is required, if the system is not capable of asynchronous IO then up to twice the number of disks used by Oracle number of DB writers should be specified by use of the db_writers initialization parameter.
11. You are using hot backup without being in archivelog mode, can you recover in the event of a failure? Why or why not
You can?t use hot backup without being in archivelog mode. So no, you couldn?t recover.
12. What causes the "snapshot too old" error? How can this be prevented or mitigated
This is caused by large or long running transactions that have either wrapped onto their own rollback space or have had another transaction write on part of their rollback space. This can be prevented or mitigated by breaking the transaction into a set of smaller transactions or increasing the size of the rollback segments and their extents.
13. How can you tell if a database object is invalid By checking the status column of the DBA_, ALL_ or USER_OBJECTS views, depending upon whether you own or only have permission on the view or are using a DBA account.
13. A user is getting an ORA-00942 error yet you know you have granted them permission on the table, what else should you check
You need to check that the user has specified the full name of the object (select empid from scott.emp; instead of select empid from emp;) or has a synonym that balls to the object (create synonym emp for scott.emp;)
14. A developer is trying to create a view and the database won?t let him. He has the "DEVELOPER" role which has the "CREATE VIEW" system privilege and SELECT grants on the tables he is using, what is the problem
You need to verify the developer has direct grants on all tables used in the view. You can?t create a stored object with grants given through views.
15. If you have an example table, what is the best way to get sizing data for the production table implementation
The best way is to analyze the table and then use the data provided in the DBA_TABLES view to get the average row length and other pertinent data for the calculation. The quick and dirty way is to look at the number of blocks the table is actually using and ratio the number of rows in the table to its number of blocks against the number of expected rows.
16. How can you find out how many users are currently logged into the database? How can you find their operating system id
There are several ways. One is to look at the v$session or v$process views. Another way is to check the current_logins parameter in the v$sysstat view. Another if you are on UNIX is to do a "ps -ef|grep oracle|wc -l? command, but this only works against a single instance installation.
17. A user selects from a sequence and gets back two values, his select is: SELECT pk_seq.nextval FROM dual;What is the problem Somehow two values have been inserted into the dual table. This table is a single row, single column table that should only have one value in it.
18. How can you determine if an index needs to be dropped and rebuilt
Run the ANALYZE INDEX command on the index to validate its structure and then calculate the ratio of LF_BLK_LEN/LF_BLK_LEN+BR_BLK_LEN and if it isn?t near 1.0 (i.e. greater than 0.7 or so) then the index should be rebuilt. Or if the ratio BR_BLK_LEN/ LF_BLK_LEN+BR_BLK_LEN is nearing 0.3.
1. How can variables be passed to a SQL routine
By use of the & symbol. For passing in variables the numbers 1-8 can be used (&1, &2,...,&8) to pass the values after the command into the SQLPLUS session. To be prompted for a specific variable, place the ampersanded variable in the code itself: "select * from dba_tables where owner=&owner_name;" . Use of double ampersands tells SQLPLUS to resubstitute the value for each subsequent use of the variable, a single ampersand will cause a reprompt for the value unless an ACCEPT statement is used to get the value from the user.
2. You want to include a carriage return/linefeed in your output from a SQL script, how can you do this
The best method is to use the CHR() function (CHR(10) is a return/linefeed) and the concatenation function "||". Another method, although it is hard to document and isn?t always portable is to use the return/linefeed as a part of a quoted string.
3. How can you call a PL/SQL procedure from SQL
By use of the EXECUTE (short form EXEC) command.
4. How do you execute a host operating system command from within SQL
By use of the exclamation ball "!" (in UNIX and some other OS) or the HOST (HO) command.
5. You want to use SQL to build SQL, what is this called and give an example
This is called dynamic SQL. An example would be: set lines 90 pages 0 termout off feedback off verify off spool drop_all.sql select ?drop user ?||username||? cascade;? from dba_users where username not in ("SYS?,?SYSTEM?); spool off Essentially you are looking to see that they know to include a command (in this case DROP USER...CASCADE;) and that you need to concatenate using the ?||? the values selected from the database.
6. What SQLPlus command is used to format output from a select
This is best done with the COLUMN command.
7. You want to group the following set of select returns, what can you group on
Max(sum_of_cost), min(sum_of_cost), count(item_no), item_no The only column that can be grouped on is the "item_no" column, the rest have aggregate functions associated with them.
8. What special Oracle feature allows you to specify how the cost based system treats a SQL statement
The COST based system allows the use of HINTs to control the optimizer path selection. If they can give some example hints such as FIRST ROWS, ALL ROWS, USING INDEX, STAR, even better.
9. You want to determine the location of identical rows in a table before attempting to place a unique index on the table, how can this be done
Oracle tables always have one guaranteed unique column, the rowid column. If you use a min/max function against your rowid and then select against the proposed primary key you can squeeze out the rowids of the duplicate rows pretty quick. For example: select rowid from emp e where e.rowid > (select min(x.rowid) from emp x where x.emp_no = e.emp_no); In the situation where multiple columns make up the proposed key, they must all be used in the where clause.
10. What is a Cartesian product
A Cartesian product is the result of an unrestricted join of two or more tables. The result set of a three table Cartesian product will have x * y * z number of rows where x, y, z correspond to the number of rows in each table involved in the join.
11. You are joining a local and a remote table, the network manager complains about the traffic involved, how can you reduce the network traffic Push the processing of the remote data to the remote instance by using a view to pre-select the information for the join. This will result in only the data required for the join being sent across.
11. What is the default ordering of an ORDER BY clause in a SELECT statement
Ascending
12. What is tkprof and how is it used
The tkprof tool is a tuning tool used to determine cpu and execution times for SQL statements. You use it by first setting timed_statistics to true in the initialization file and then turning on tracing for either the entire database via the sql_trace parameter or for the session using the ALTER SESSION command. Once the trace file is generated you run the tkprof tool against the trace file and then look at the output from the tkprof tool. This can also be used to generate explain plan output.
13. What is explain plan and how is it used
The EXPLAIN PLAN command is a tool to tune SQL statements. To use it you must have an explain_table generated in the user you are running the explain plan for. This is created using the utlxplan.sql script. Once the explain plan table exists you run the explain plan command giving as its argument the SQL statement to be explained. The explain_plan table is then queried to see the execution plan of the statement. Explain plans can also be run using tkprof.
14. How do you set the number of lines on a page of output? The width
The SET command in SQLPLUS is used to control the number of lines generated per page and the width of those lines, for example SET PAGESIZE 60 LINESIZE 80 will generate reports that are 60 lines long with a line width of 80 characters. The PAGESIZE and LINESIZE options can be shortened to PAGES and LINES.
15. How do you prevent output from coming to the screen
The SET option TERMOUT controls output to the screen. Setting TERMOUT OFF turns off screen output. This option can be shortened to TERM.
16. How do you prevent Oracle from giving you informational messages during and after a SQL statement execution
The SET options FEEDBACK and VERIFY can be set to OFF.
17. How do you generate file output from SQL
By use of the SPOOL comm
No comments:
Post a Comment